System Information Block -5 in LTE (SIB-5)

 Ø  Contains information relevant only for inter-frequency cell re-selection i.e. information about other E‑UTRA frequencies and inter-frequency neighboring cells relevant for cell re-selection

 Ø  Includes cell re-selection parameters common for a frequency as well as cell specific re-selection parameters

Information’s:

InterFreqCarrierFreqInfo	can be specified upto 8 carrier frequencies
dl-CarrierFreq	carrier frequency helps the UE to search the cells
q-RxLevMin	Minimum RSRP value of the inter-frequency cell. Value -70 to -22 dBm. Actual value: signaled value * 2
p-Max	maximum allowed UL transmit power of the cell
t-ReselectionEUTRA	Defines the time to trigger for cell reselection. Value 0 to 7 sec.
t-ReselectionEUTRA-SF	scaling factors for Medium and High mobility
threshX-High	# Threshold (in dB) used by UE for cell re-selection to a HIGHER priority #  The Srxlev of the candiate cell is greater than threshX_High # Value 0 to 31 dB. Actual value= Signaled value * 2
threshX-Low	# Threshold (in dB) used by UE for cell re-selection to a LOWER priority #  Cell re-selection is allowed only when Srxlev of the candiate cell is greater than threshX_Low and RSRP of serving cell is less than the value of ThreshServingLow singalled within SIB3 # Value 0 to 31 dB. Actual value= Signaled value * 2
allowedMeasBandwidth	defined in terms of Resouce blocks associated with a specific channel bandwidth
cellReselectionPriority	defines the priority of the frequency layer
neighCellConfig	information regarding the neighboring cells
q-OffsetFreq	defines the RSRP measurement offset, applied to all cells on the specified RF carrier
interFreqBlackCellList	the mentioned cells are no considered for cell reselection