Ø Contains
information relevant only for inter-RAT (GERAN) cell re-selection
Information’s:
t_ReselectionGERAN
|
Time to trigger for reselection. Value 0 to 7 sec.
|
carrierFreqsInfoList[0]
|
carries upto 16 instances of GERAN freq.
|
carrierFreqs
|
|
startingARFCN
|
Start of the ARFCN
|
bandIndicator
|
dcs1800 or pcs1900
|
followingARFCNs
|
ARFCN groups
|
cellReselectionPriority
|
Absolute priority of the GERAN layer. Value 0 to 7, whereas 0 is the
lowest priority
|
ncc_Permitted
|
Network Color Code. Is a bitmap value
|
q_RxLevMin
|
minimum RSSI value required
|
p_MaxGERAN
|
maximum allowed UL transmit power
|
threshX_High
|
# Threshold (in dB) used by UE for cell re-selection to a HIGHER priority
frequency
# The Srxlev of the candidate
cell is greater than threshX_High
# Value 0 to 31 dB. Actual
value= Signaled value * 2
|
threshX_Low
|
# Threshold (in dB) used by UE for cell re-selection to a LOWER
priority frequency
# Cell re-selection is allowed
only when Srxlev of the candidate
cell is greater than threshX_Low
and RSRP of serving cell is less than the value of ThreshServingLow singalled within SIB3
# Value 0 to 31 dB. Actual
value= Signaled value * 2
|
No comments:
Post a Comment